merit industries, inc.
PM0070-0A
OWNER’S MANUAL
FOR TECHNICAL ASSISTANCE
CONTACT:
Merit Industries, Inc. Customer Service Department
USA and Canada call toll-free:
1-800-445-9353
Outside the USA and Canada call:
(215) 639-4700
FAX: (215) 639-5346
2525 State Rd., P.O. Box 5004, Bensalem, PA 19020-8529
COPYRIGHT
1996 MERIT INDUSTRIES, INC.
PM0070-0A
PIT BOSS MEGATOUCH IV MANUAL
1
Game Description
The Pit Boss Megatouch comes housed
in a 13” countertop cabinet, a 19” cabaret cabinet or
a 19” upright cabinet.
The countertop and upright models have 3 key-
locked compartments: the CPU section, the coin
mech section and the coin box. The cabaret model
has 4 key-locked sections: the CPU, coin mech &
coin box sections, as well as a locked rear monitor
door. The countertop is equipped with one coin mech
and the cabaret model has two; optional bill
acceptors are available for the cabaret.
CPU Section
The CPU section is accessible from the rear of the
unit in the countertop and 19” upright versions. It
houses the CRT, the monitor controls, the CPU
(CRT-260), the power supply and the main harness.
In the cabaret model, the CPU section is located at
the bottom of the front side of the unit and contains
only the CPU and power supply (monitor controls for
the cabaret version are located in the coin mech
section).
• The CRT-260 is the “brains” of the machine.
Located on the board are the program option
EPROMs, the DIP switch, the volume control dial
and the Dallas security key.
• The main harness is used to connect the CPU
board to the power supply, the CRT controls and
the CRT monitor.
Coin Mech/Coin Box Section
13” Countertop
The coin mech/coin box section is accessible from
the front of the unit. This section is key-locked for
security purposes. A sturdy metal box, located within
the coin mech section, holds all coins deposited into
the machine. The coin box is separately key-locked
for security.
Also located within the cavity of the coin mech are 2
internal switches, ”SETUP” and “CALIBRATE,” and
the coin meter. Location of these switches can be
seen in Figure 4. Pressing the “SETUP” button will
bring you to the Megatouch Setup screen (see
Figure 1). See the next section for calibration
instructions.
19” Cabaret/19” Upright
The coin mech and coin box are accessible from the
front of the cabinet. Both doors are key-locked for
security purposes.
Also located within the cavity of the coin mech are 2
internal switches, ”SETUP” and “CALIBRATE,” and
the coin meter. Location of these switches can be
seen in Figures 6 and 9. Pressing the “SETUP”
button will bring you to the Megatouch Setup screen
(see Figure 1). See the next section for calibration
instructions.
The monitor controls for the cabaret cabinet can be
found “Velcroed” to the bottom of the cabinet in the
coin mech section.
Screen Calibration
The machine must be in the idle mode or game
select mode to calibrate the touchscreen.
• Find the “CALIBRATE” button located behind the
coin mech and press it to enter the screen
calibration mode.
• Touch the center of the first circle that appears
on the screen. Once touched, a second circle
will appear on the screen.
NOTE: YOU MUST HOLD YOUR FINGER ON THE CIRCLE
FOR APPROXIMATELY 2 SECONDS FOR THE
CALIBRATION TO BE RECOGNIZED.
• Touch the center of the second circle that
appears on the screen.
• Once the second circle is touched, a crosshair
will appear on the screen. To test the calibration
of the screen, touch the crosshair with your
COPYRIGHT
1996 MERIT INDUSTRIES, INC.
PM0070-0A
PIT BOSS MEGATOUCH IV MANUAL
2
finger and slowly drag your finger around the
screen. The crosshair should follow your
movement.
• Touch
the
“EXIT TEST” icon.
NOTE: On upright models, if you open the
monitor door while the machine is on, you will
have to recalibrate the touchscreen.
Degaussing your Monitor
If your monitor is displaying “purity problems,” (a
display with purity problems will have parts of an all-
white screen affected by blotches of color) the
monitor needs to be degaussed using a “degaussing
coil.” A degaussing coil is a circular electromagnet,
used to cancel out any stray magnetic fields that may
build up on a metal object.
All of our monitors have built-in degaussing coils that
are automatically activated on power-up. If your
game is experiencing minor purity problems, try
powering down the game for 5 minutes and then
reapplying power to activate the degaussing coil. If
the problem is not corrected, you will have to use a
manual degaussing coil.
Follow the instructions below for degaussing a
monitor.
1. Plug in your degaussing coil.
2. Hold the coil about three feet from the monitor,
press the trigger to activate the magnetic field
(for circular-shaped coils, orient the coil so you
see the monitor through the hole in the middle;
for wand-shaped coils, point the wand towards
the screen).
3. Move the coil in a circular motion around the
face of the monitor and slowly approach the
game.
4. Continuing to move the coil in a circular motion,
slowly back away from the monitor.
5a. CIRCULAR-SHAPED COILS: When you are
about three feet away, quickly turn the coil
perpendicular to the monitor and release the
trigger.
5b. WAND-SHAPED COILS: When you are about
three feet away, point the wand away from the
monitor and release the trigger.
Monitor Colors Adjustment
Procedure
For adjusting the colors on any of our monitor types,
we suggest following the procedures described
below.
For all monitor types, the visual cues used to adjust
the monitors are white cards and gray boxes (e.g.
the speed bonus box); you will adjust the monitor
controls until the cards are white and the boxes are
gray.
Eygo Monitors
1. Disconnect the signal connector from the CPU
board.
2. Turn the brightness on the monitor control panel
to its highest setting.
3. Turn down the brightness control on the flyback
until there is a very low level of brightness on the
screen.
4. Adjust the RGB controls (on the neck board)
until the screen color is a light gray (you may
need to adjust the control panel brightness to
keep the brightness level down, BUT DO NOT
ADJUST THE BRIGHTNESS ON THE
FLYBACK).
5. Once you have achieved a light gray screen,
reattach the signal input and set the game to the
RUN 21 game screen.
6. Using the RGB controls (on the neck board),
adjust the colors until the playing cards look
white and the speed bonus box is gray. To check
against a larger gray area, start a game and
touch the “Collect Win” icon to bring up the point
total box.
7. To fine tune the colors, use the RGB controls
located on the CPU board.
Ducksan Monitors
1. Set the game to the Run 21 hi-score screen.
COPYRIGHT
1996 MERIT INDUSTRIES, INC.
PM0070-0A
PIT BOSS MEGATOUCH IV MANUAL
3
2. Reduce the brightness from the monitor control
panel and adjust the RGB CUTOFF controls (as
needed) until the background is black.
3. Enter the Run 21 game screen. Reduce the
brightness and adjust the RB DRIVE controls
until the speed bonus box is light gray and the
cards are white (there is no Green DRIVE
control, so adjust the Green CUTOFF control if
there is too much, or too little, green).
Wells-Gardner, Telco and TUV Eygo
Monitors
1. Set the game to the Run 21 hi-score screen.
2. Reduce the brightness from the monitor control
panel and adjust the RGB CUTOFF controls (as
needed) until the background is black.
3. Enter the Run 21 game screen and adjust the
RGB DRIVE controls until the playing cards are
white and the speed bonus box is gray.
Maintenance
Cleaning the Cabinet
• The cabinet should be cleaned with a damp cloth
and mild detergent.
Cleaning the Touchscreen Monitor
• The touchscreen monitor should be cleaned with
a damp cloth and mild detergent.
To gain access to the entire surface of the monitor
screen on the upright model, you will have to release
the monitor door latches. To do so, open the coin
mech door. Located inside, above and to the right and
left of the coin mech, are two monitor door latches.
Unsnap the monitor door latches and lift the door
upwards. See Figure 9.
To gain access to the entire surface of the monitor
screen on the cabaret model, you will have to
release the monitor door latches. To do so, open the
coin mech door. Located inside, above and to the
right and left of the coin mech, are two monitor door
slide-latches. Loosen the thumb nuts securing the
latch and slide the latch open. Pull up on the bottom
of the bezel to remove it (NOTE: TO FULLY
REMOVE THE BEZEL, YOU MUST DISCONNECT
THE GROUND BRAID). See Figure 6.
To gain access to the entire surface of the monitor
screen on the countertop model, you will have to
remove the top of the machine. To remove the top of
the machine, unlock and open the rear door. Locate
the thumb nuts holding the lock brackets on each
side of the monitor shelf. Unscrew and remove the
thumb nuts and push the top forward. Pull upwards
on the top to remove it from the machine. See Figure
5 for lock bracket locations.
NOTE: DO NOT USE ANY ABRASIVE SOLVENTS, ACID OR
VINEGAR-BASED CLEANSERS ON THE MONITOR.
SUCH CLEANSERS COULD HARM THE
TOUCHSCREEN OVER TIME. BE CAREFUL NOT TO
USE COMMERCIAL CLEANERS CONTAINING ANY
OF THESE SUBSTANCES.
Troubleshooting
Security Key Error Messages
“KEY NOT VALID” message means the security
key is missing
“KEY QUESTION SET ERROR” message means
the security key does not match
the chip set.
Coin Jam
The game also has coin jam and stringing detection
software. Should a coin become jammed in the
mech or someone tries to string the mech, a
continuous tone will be emitted by the game. To
clear the coin jam indicator sound, the game must be
powered down and back up.
If the game emits the coin jam indicator sound when
powered up, this may indicate that the NORMALLY
CLOSED contacts of the coin mechanism are being
used. The NORMALLY OPEN contacts must be
used.
DIP Switch Settings
Standard Program Settings
COPYRIGHT
1996 MERIT INDUSTRIES, INC.
PM0070-0A
PIT BOSS MEGATOUCH IV MANUAL
4
The game contains one DIP switch. The DIP switch
comes factory set. It determines which size monitor
is being used, number of Trivia rounds, whether the
answer is displayed in Trivia, whether the machine
displays “quarters” or “credits” and also controls
video sync adjustment. These settings should not
need to be changed.
DIP SWITCH
OFF
ON
Position 1
13“
Touchscreen
19”
Touchscreen
Position 2
Quarters
Credits
Position 3
4 round
Trivia Whiz*
5 round
Trivia Whiz
Position 4
Trivia Whiz
Answer not
Displayed
Trivia Whiz
Answer
Displayed
Positions 5 & 6
Horizontal
Adjustment‡
Horizontal
Adjustment‡
Positions 7 & 8
Vertical
Adjustment‡
Vertical
Adjustment‡
*300,000 points for bonus round
‡This adjusts the vertical and horizontal alignment of the picture.
It is not an adjustment for touchscreen calibration.
To adjust vertical and horizontal control:
• Press
“TEST SCREEN” on the “Megatouch
Setup” screen.
• A crosshair will appear on the screen. Change
the DIP switch settings until the horizontal and
vertical lines of the crosshair meet in the middle.
Custom Program Versions
Some of the options or features in the standard
game may not be offered in certain jurisdictions.
Depending upon the program version being used,
the settings may differ slightly.
PROGRAM #
PROGRAM
VERSION
PROGRAM
DIFFERENCES
9255-40-01
STANDARD
VERSION
INCLUDES ALL OPTIONS
NO RESTRICTIONS
9255-40-02
MINNESOTA
VERSION
EXCLUDES CASINO
GAMES
9255-40-06
CALIFORNIA
VERSION
EXCLUDES POKER
DOUBLE-UP FEATURE &
NO FREE GAME IN
SOLITAIRE
9255-40-07
NEW JERSEY
VERSION
INCLUDES 2-COIN LIMIT
WITH LOCKOUT COIL
9255-40-50
BI-LINGUAL
ENG/GER
SAME AS STANDARD
VERSION, WITHOUT
WORD/CASINO GAMES
9255-40-57
INTER-
NATIONAL
SAME AS STANDARD
VERSION, WITHOUT
WORD GAMES
9255-40-60
BI-LINGUAL
ENG/FRE
SAME AS STANDARD
VERSION, WITHOUT
WORD/CASINO GAMES
9255-40-62
CROATIA
SAME AS STANDARD
VERSION, WITH NO FREE
CREDIT
COPYRIGHT
1996 MERIT INDUSTRIES, INC.
PM0070-0A
PIT BOSS MEGATOUCH IV MANUAL
5
To Enter This Screen, Press The “Setup” Button In The Coin Mech Section
Figure 1 - Megatouch Setup Screen
Setup Screen Functions
Coin-In Menu:
Enters the coin/credit setup screen.
Game Menu:
Enters the game menu selection screen.
Display Books:
Enters the bookkeeping statistics screen.
Test Screen:
Enters the touchscreen calibration test.
Clear Hi- Scores:
Clears all game high scores.
Free Credit:
Adds credit without using coin switch. Free credits are listed separately in the
books screen.
Clear Credit:
All credits on the machine are erased.
Exit Setup:
Return to the attract mode.
Three Stars Enabled
This feature allows the high scores to be cleared without opening the game. When the game is in attract
mode and the screen is touched, the message “YOU’VE GOT THE TOUCH - DEPOSIT COINS NOW” will
appear on the screen. If the “Three Stars Enabled” switch is set to “YES,” a red, white and blue star will
appear at the top of the screen in random order. Touch the stars in “Red-White-Blue” sequence to clear
the high scores.
MEGATOUCH SETUP
GAME
MENU
DISPLAY
BOOKS
COIN-IN
MENU
EXIT
SETUP
CLEAR
CREDIT
TEST
SCREEN
CLEAR
HI-SCORES
FREE
CREDIT
3
DEFAULT
YES
NO
SOLITAIRE BUY-IN
YES
NO
SEX TOPICS IN WORD GAMES
ON
OFF
BONUS GAME IN SOLITAIRE
2
3
ROUNDS IN TRIVIA TWISTER
3
4
BALLS IN BREAKIN BRICKS
NO
YES
THREE STARS ENABLED
NO
YES
PLAYER SELECTABLE LANGUAGE
NO
YES
LANGUAGE ENGLISH/OTHER
9255-40-01 5-30-1996 12:00:00
MT IV
SETUP
COPYRIGHT
1996 MERIT INDUSTRIES, INC.
PM0070-0A
PIT BOSS MEGATOUCH IV MANUAL
6
To Enter This Screen, Press “Game Menu” In The Setup Screen
The game list and prices are programmed using this screen. Up to fourteen games
may be made available for the players to choose. The top of the screen shows the
game positions available, with the price for each game. The lower section shows all
games included in the program. The lower buttons will clear the entire menu, clear the
selected menu item, format the game menu to eliminate blanks, display the Menu 2
Game Menu screen and exit the Game Menu screen.
To program the game menu, select the menu position you want the game to occupy,
by touching that position. Then touch the game name from the game list on the lower
portion of the screen. That game will now appear in the menu. To adjust the price,
touch the price in the game menu. Each touch will rotate the price from 25c (1CR), to
50c (2CR), to 75c (3CR), to $1 (4CR) and back to 25c (1CR). Touch “EXIT” when
done.
Shaded games are not currently among the active games in the two Game Menu
screens. To enable one of these games, it must replace one of the fourteen games in
the active Game Menu screens.
1 SOLITAIRE
.25
3 RUN 21
.25
5 ROYAL FLASH
.25
7 CONQUEST
.25
2 11-UP
.25
4 TRI-TOWERS
.25
6 FOURPLAY
.25
8 MORE GAMES...
SOLITAIRE
RUN 21
TRIVIA WHIZ
DRAW POKER
SUPER 7 STUD
HORSES
ROYAL FLASH
TRIVIA TWISTER
MEM-O-REE
BREAKIN BRICKS
DEFAULT
CLEAR
1
FORMAT
EXIT
MENU
2
CLEAR
ALL
Figure 2 - Game Menu Screen
ROLL THE DICE
PHRAZE CRAZE
MATCH‘EM UP
FOURPLAY
CONQUEST
11-UP
TRI-TOWERS
COPYRIGHT
1996 MERIT INDUSTRIES, INC.
PM0070-0A
PIT BOSS MEGATOUCH IV MANUAL
7
To Enter This Screen, Press “Coin-In Menu” In The Setup Screen
Figure 3 - Coin-In Menu Screen
The coin/credit ratios of the game may be adjusted to meet any application. The CPU board supports up to six coin
inputs: two mechanical mech inputs (1M and 2M) and four electronic mech inputs (1E, 2E, 3E and 4E). (Electronic coin
mechs are typically used when more than one type of coin needs to be accepted. If you would like to convert your game
from a mechanical mech to an electronic mech, please contact your distributor or Merit Technical Support for wiring
details.)
The coin/credit ratios can be adjusted by touching the screen at the location you want to change. The meter pulse can
also be adjusted so that the coin meter can show the actual cash value of the coins in the cashbox, not just the total
number of coins .
Example: Let’s say that in the country of Atlantis the currency is called units. Atlantis, however, has a 1 unit coin, a 2
unit coin and a 5 unit coin. You decide that 1 credit on the game should cost 1 unit. However, to encourage more play
you want to give 6 credits for a 5 unit coin. The coin setup screen would be programmed as follows:
COIN
INPUT
COINS
=
CREDITS
&
METER
PULSES
1E
1
1
1
2E
1
2
2
3E
1
6
5
For every 1 unit coin, the game would give 1 credit and count 1 pulse on the mechanical coin counter. For every 2 unit
coin, the game would give 2 credits and count 2 pulses on the mechanical meter. For every 5 unit coin, the game would
give 6 credits and pulse the mechanical meter 5 times. The mechanical meter will now display the total number of
“units” in the cashbox, not total coins or credits. Press “DEFAULT” to return to the factory settings. Press “EXIT” to
return to the GAME SETUP menu.
COIN/CREDIT SETUP
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
DEFAULT
EXIT
=
CREDITS
&
2M
1M
4E
3E
2E
1E
COIN
INPUT
COINS
METER PULSES
COPYRIGHT
1996 MERIT INDUSTRIES, INC.
PM0070-0A
PIT BOSS MEGATOUCH IV MANUAL
8
FIGURE 4 - 13” COUNTERTOP (FRONT VIEW)
FIGURE 5 - 13” COUNTERTOP (REAR VIEW)
COPYRIGHT
1996 MERIT INDUSTRIES, INC.
PM0070-0A
PIT BOSS MEGATOUCH IV MANUAL
9
FIGURE 6 - 19” CABARET (FRONT VIEW)
FIGURE 7 - 19” CABARET (REAR VIEW)
COPYRIGHT
1996 MERIT INDUSTRIES, INC.
PM0070-0A
PIT BOSS MEGATOUCH IV MANUAL
10
FIGURE 8 - 19” UPRIGHT (FRONT VIEW)
FIGURE 9 - 19” UPRIGHT (REAR VIEW)
COPYRIGHT
1996 MERIT INDUSTRIES, INC.
PM0070-0A
PIT BOSS MEGATOUCH IV MANUAL
11
MEGATOUCH IV PARTS LISTS
COUNTERTOP
REF #
QUANTITY
PART NO.
DESCRIPTION
X
1
EC2001
POWER CORD, 120V
X
1
EC2002
POWER CORD, 240V
X
2
GL3000-XX
DECAL, MEGATOUCH, (-01=RT;-02=LT)
X
1
SA7297-05
SIGN HOLDER, W/ADH, MEGATOUCH 4
1
1
MW5165-01
MONITOR FILLER PLATE
2
1
MW5167-01
LOCK BRACKET, REAR DOOR
3
2
MW5151-01
MONITOR SUPPORT
4
1
MW5150-01
MAIN CHASSIS
5
1
HW8003
RUBBER ANTI-SKID PAD
6
1
HW8958
LAZY SUSAN, 12” DIAMETER
7
1
HW9001
PLASTIC TUBING
8
1
SA5151-01
TOUCHSCREEN/CRT ASSEMBLY
9
1
EC9359
CRT, COLOR, 14” CGA, WITH FRAME
10
1
EC9824
TOUCHSCREEN OVERLAY
11
2
MW5155-01
LID, RETAINING BRACKET
12
1
MW5159-01
LID, LOCK BRACKET, RIGHT
13
1
MW5159-02
LID, LOCK BRACKET, LEFT
14
1
MW5161-01
REAR DOOR
16
1
MW5164-01
HINGE, REAR DOOR
17
1
HW8713
FLAT LOCK #564
18
1
WD5171-01
CABINET SIDE, RIGHT
19
1
WD5171-02
CABINET SIDE, LEFT
20
1
EC9154
COUNTER, 12V, FROG EYE MOUNTING
21
1
SA5123-01
AC POWER HARNESS
22
1
SA5131-01
MAIN HARNESS
23
1
HW8953
BEZEL, 13” T/S
24
1
SA4084
4” SPEAKER ASSEMBLY
25
1
EC7526
POWER SUPPLY, SW, 11 AMP
26
1
MW5156-01
RETAINING BRACKET, COIN BOX
27
1
TA10004-02
PCA, CPU, VID, 260 TESTED
28
1
EC9840
SMT-3 TOUCHSCREEN CONTROLLER
30
1
HW8741
CIRCULAR LOCK
31
1
SA5156-01
CONNECTOR COIN BOX ASSEMBLY
32
1
SA5156-01
CONNECTOR COIN BOX ASSEMBLY
33
1
SA5153-01
COIN BOX ASSEMBLY
34
1
HW8727
LOCK, COIN BOX
35
1
MW5153-01
LID, COIN BOX
36
2
HW4498
THUMB SCREWS, BRASS
37
1
SA5152-01
POWER ENTRY 120V
38
1
SB0004-01*
ASSY, MOV/ARRESTOR (*240V GAMES ONLY)
19” CABARET
COPYRIGHT
1996 MERIT INDUSTRIES, INC.
PM0070-0A
PIT BOSS MEGATOUCH IV MANUAL
12
REF#
QUANTITY
PART NO.
DESCRIPTION
X
1
EC2001
POWER CORD, 120V
X
1
EC2002
POWER CORD, 240V
1
1
WD5060-01
WOOD CABINET, URTS, 19” CABARET
2
1
MW1672-01
CONTROL PANEL, 19” CABARET
3
1
MW1673-01
COVER SCREEN, 19” CABARET
4
1
MW1671-01
BRKT, GLASS, UPPER, 19” CABARET
5
1
HW8951-01
BEZEL, MONITOR, 19” CABARET
6
1
SA3266-02
CRT ASSY, 19” CABARET
7
1
SA3263-01
POWER ENTRY, URTS, 120V
7
1
SA3270-01
POWER ENTRY, URTS, 240V
8
1
SA4084
SPEAKER ASSY, 4”
9
1
SA3209-01
BRKT ASSY, METER/TEST SW
10
1
SA3281-01
MAIN HARNESS, 19” CABARET
11
1
TA10004-02
PCA, CPU, VID, 260
12
1
SA3282-01
POWER HARNESS, 19” CABARET
13
1
EC7526
POWER SUPPLY, SW, 11 AMP
14
1
WD5052-01
PC SHELF, 13” CABARET
15
1
SA3264-01
SWITCH ASSY, URTS
16
1
SB1523-02
FLUORESCENT LAMP ASSY, 120V, 22”
17
1
EC6052-04
FLUOR, 15”, 120V-60Hz, W/10” CABLE
18
1
GL2401-03
VINYL, MARQ, MEGATOUCH 19” CABARET
19
1
GL2411-03
PLEXI, CLR, 19” CABARET SIGN
20
2
GL2999-01
DECAL, MEGATOUCH, URTS, CABARET
21
1
MW1674-01
MONITOR SUPPORT, LEFT, 19” CAB
22
1
MW1674-02
MONITOR SUPPORT, RIGHT, 19” CAB
23
1
HW8979
SLIDE LATCH, DART MATRIX SW
24
1
HW1677-01
COVER, SPEAKER HOLE, 19” CABARET
25
1
HW6366
MOUNTING POST, KNURLED
26
1
LB2100
LAMP, FLUOR, 15: F15T8CW
27
1
EC9840
SMT-3 TOUCHSCREEN CONTROL MODULE
30
1
MW1670-01
SPEAKER, MTG BRKT, 19” CAB
31
1
EC9374
CRT, COLR, 20”, CGA, DC COUPLED
32
1
EC9839
OVRLY, T/S 19” W/58” CABLE
33
1
WD5061-01
SHELF, MONITOR 19” CAB
28
1
MW0006-01*
COVER, PCA (*240V GAMES ONLY)
29
1
SB0004-01*
ASSY, MOV/ARRESTOR (*240V GAMES ONLY)
COPYRIGHT
1996 MERIT INDUSTRIES, INC.
PM0070-0A
PIT BOSS MEGATOUCH IV MANUAL
13
19” UPRIGHT
REF#
QUANTITY
PART NO.
DESCRIPTION
X
1
EC2001
POWER CORD, 120V
X
1
EC2002
POWER CORD, 240V
1
1
HW8711
ANCHOR PLATE FOR CAM LOCK
2
1
HW8716
FLAT LOCK, #564
3
4
HW8960
LEG LEVELER
4
2
HW89974
CATCH SNAP TENSION LOCK
5
1
MW5007-01
BEZEL WITH HINGE
6
1
MW5006-01
SPEAKER COVER
7
1
SA3214-01
MAIN HARNESS
8
1
SA3216-01
AC POWER HARNESS
9
1
EC7526
SWITCHING POWER SUPPLY, 11 AMP
10
1
TA10004-02
PCA, CPU, VID, 260
11
1
SA3202-04
SHELF ASSEMBLY, TOUCHSCREEN/CRT, 120V
12
1
WD2014-01
PCB MOUNTING SHELF
13
1
SA3210-02
TOUCHSCREEN/CRT ASSEMBLY
14
1
EC9374
CRT, COLOR, 19” CGA
15
1
EC9823
TOUCHSCREEN OVERLAY, 19”
16
1
WD2013-01
CRT MOUNTING SHELF
17
1
MW5003-01
CRT ADJUST, BRACKET, LEFT
18
1
MW5003-02
CRT ADJUST, BRACKET, RIGHT
19
1
SA3206-01
POWER ENTRY, UR 19”, T/S, 120V
19
1
SA3170-01
POWER ENTRY, UR 19”, T/S, 240V
20
1
SA4084
SPEAKER ASSEMBLY
21
1
WD2012-01
CABINET, 19” UPRIGHT TOUCHSCREEN
22
2
MW5005-01
LATCH MOUNTING BRACKET
23
1
SA3209-01
METER/TEST SWITCH BRACKET ASSEMBLY
24
1
EC9840
SMT-3 TOUCHSCREEN CONTROL MODULE
25
1
MW0006-01*
COVER, PCA, 19” URTS/CAB (*240V GAMES ONLY)
26
1
SB0004-01*
ASSY, MOV/ARRESTOR (*240V GAMES ONLY)
COPYRIGHT
1996 MERIT INDUSTRIES, INC.
PM0070-0A
PIT BOSS MEGATOUCH IV MANUAL
14
Merit Video Countertop
Limited Warranty
Merit Industries, Inc. warrants it’s video countertop and
upright machines to be free from defects in material
and workmanship for a period of six months from the
date of delivery or seven months from the date of
shipment from its facilities, whichever occurs first. The
warranty covers all electrical components (except fuses
and light bulbs) and printed circuit boards. Other items
are covered by warranty periods offered by the original
equipment manufacturers (power supplies - 90 days;
video monitors - 90 days).
Failure due to misuse, vandalism, excessive or
intentional abuse, operation outside specified
conditions (including, but not limited to, improper
electrical power source), fire, water damage, acts of
God, acts of war and civil unrest are specifically
excluded.
Merit products are carefully inspected and thoroughly
tested prior to packing and shipment. Any damage
discovered upon receipt of goods, whether obvious or
concealed, must be reported immediately to the
delivering carrier and claims made directly to them.
Merit assumes no responsibility for damages once the
product has left its facilities and any disputes regarding
transportation damage must be resolved with the
shipping company(s).
Merit will repair or replace, at its option, any
component, part or assembly that fails under warranty,
provided that the failed item is returned, shipping
charges prepaid, to Merit’s repair facility and Merit is
notified of the failure within the warranty period. Merit
reserves the right to request the serial numbers of the
item and/or game which has failed , and copies of sales
invoices, bills of lading or other documents as required
to determine the validity of the warranty coverage. Merit
will return or replace warranty items, as specified
above, shipping charges prepaid, by ground
transportation.
Merit’s obligation shall be limited to repair or
replacement as stated above, and shall specifically
exclude any liability for consequential damages or loss
of earnings.
Merit may, at its discretion, provide replacement parts
under warranty prior to receiving defective items
without incurring any ongoing obligation to extend such
accommodations.
In certain instances, due to geographical or other
considerations, Merit may offer PCB warranty service
on an extended time basis as follows:
(a) User notifies Merit in writing (or FAX) of PCB
failure, providing dates of failure, serial numbers
and a brief description of failure symptoms.
(b) Failed PCBs are accumulated for a time
period or quantity accumulation, as designated
by Merit and sent in one shipment to save
shipping expenses.
(c) Merit honors warranty as per dates of failure
notification.
The above terms and conditions constitute the sole
obligation, written or implied, of Merit Industries under
its warranty coverage.
PROPRIETARY
THE INFORMATION CONTAINED HEREIN IS THE
EXCLUSIVE PROPERTY OF MERIT INDUSTRIES,
INCORPORATED AND SHALL NOT BE USED,
DISTRIBUTED OR REPRODUCED IN WHOLE, OR IN
PART, WITHOUT THE EXPRESS WRITTEN
PERMISSION OF MERIT INDUSTRIES,
INCORPORATED.
FCC WARNING
THIS EQUIPMENT COMPLIES WITH THE
REQUIREMENTS IN PART 15 OF FCC RULES FOR
A CLASS “A” COMPUTING DEVICE. OPERATION IN
A RESIDENTIAL AREA MAY CAUSE
INTERFERENCE TO RADIO AND TV RECEPTION
REQUIRING THE OPERATOR TO TAKE WHATEVER
STEPS ARE NECESSARY TO CORRECT THE
INTERFERENCE
.