Megatouch Owner's Manual (PM0191) — Megatouch Support & Repair

Owner's manual for the Megatouch countertop, upright, and cabaret cabinet models covering game description and compartments.

merit industries, inc.

OWNER’S MANUAL

FOR TECHNICAL ASSISTANCE

CONTACT:

Merit Industries, Inc. Customer Service Department

USA and Canada call toll-free:

1-800-445-9353

Outside the USA and Canada call:

(215) 639-4700

FAX: (215) 639-5346

2525 State Rd., P.O. Box 5004, Bensalem, PA 19020-8529

PM0191

 1998 MERIT INDUSTRIES, INC.

PM0191

MEGATOUCH™ 6 MANUAL

Game Description

The Megatouch™ comes housed in a 13” countertop

cabinet, a 19” upright cabinet or a 19” cabaret cabinet.

The countertop model has 3 key-locked compartments:

the CPU section, the coin mech section and the coin

box. The upright and cabaret models have 4 key-

locked compartments: the CPU section, the coin mech

section, the coin box and the rear door. The countertop

is equipped with one coin mech and the upright and

cabaret models have two; optional bill acceptors are

available for all models.

CPU Section

The CPU section is accessible from the rear of the unit

in the countertop and upright versions. It houses the

CRT, the monitor controls, the CPU (CRT-260), the

power supply and the main harness. In the cabaret

model, the CPU section is located at the bottom of the

front side of the unit and contains only the CPU and

power supply (monitor controls for the cabaret version

are located in the coin mech section).

• The CRT-260 is the “brains” of the machine.

Located on the board are the program option

EPROMs, the DIP switch, the volume control dial

and the Dallas security key.

• The main harness is used to connect the CPU

board to the power supply, the CRT controls and
the CRT monitor.

Coin Mech/Coin Box Section

13” Countertop

The coin mech/coin box section is accessible from the

front of the unit. This section is key-locked for security

purposes. A sturdy metal box, located within the coin

mech section, holds all coins deposited into the

machine. The coin box is separately key-locked for

security.

Also located within the cavity of the coin mech are 2

internal switches, ”SETUP” and “CALIBRATE,” and the

coin meter. Location of these switches can be seen in

Figure 4. Pressing the “SETUP” button will bring you to

the Megatouch Setup screen (see Figure 1). See the

next section for calibration instructions.

19” Cabaret/19” Upright

The coin mech and coin box are accessible from the

front of the cabinet. Both doors are key-locked for

security purposes.

Also located within the cavity of the coin mech are 2

internal switches, ”SETUP” and “CALIBRATE,” and the

coin meter. Location of these switches can be seen in

Figures 6 and 9. Pressing the “SETUP” button will bring

you to the Megatouch Setup screen (see Figure 1). See

the next section for calibration instructions.

The monitor controls for the cabaret cabinet can be

found “Velcroed” to the bottom of the cabinet in the

coin mech section.

Screen Calibration

The machine must be in the idle mode or game select

mode to calibrate the touchscreen.

• Find the “CALIBRATE” button located behind the

coin mech and press it to enter the screen
calibration mode.

• Touch the center of the first circle that appears on

the screen. Once touched, a second circle will
appear on the screen.

NOTE: YOU MUST HOLD YOUR FINGER ON THE CIRCLE FOR

APPROXIMATELY 2 SECONDS FOR THE
CALIBRATION TO BE RECOGNIZED.

• Touch the center of the second circle that appears

on the screen.

 1998 MERIT INDUSTRIES, INC.

MEGATOUCH™ 6 MANUAL

PM0191

• Once the second circle is touched, a crosshair will

appear on the screen. To test the calibration of the
screen, touch the crosshair with your finger and
slowly drag your finger around the screen. The
crosshair should follow your movement.

• Touch

the

“EXIT TEST” icon.

Degaussing your Monitor

If your monitor is displaying “purity problems,” (a

display with purity problems will have parts of an all-

white screen affected by blotches of color) the monitor

needs to be degaussed using a “degaussing coil.” A

degaussing coil is a circular electromagnet, used to

cancel out any stray magnetic fields that may build up

on a metal object.

All of our monitors have built-in degaussing coils that

are automatically activated on power-up. If your game

is experiencing minor purity problems, try powering

down the game for 5 minutes and then reapplying

power to activate the degaussing coil. If the problem is

not corrected, you will have to use a manual

degaussing coil.

Follow the instructions below for degaussing a monitor.

1. Plug in your degaussing coil.

2. Hold the coil about three feet from the monitor,

press the trigger to activate the magnetic field (for
circular-shaped coils, orient the coil so you see the
monitor through the hole in the middle; for wand-
shaped coils, point the wand towards the screen).

3. Move the coil in a circular motion around the face

of the monitor and slowly approach the game.

4. Continuing to move the coil in a circular motion,

slowly back away from the monitor.

5a. CIRCULAR-SHAPED COILS: When you are about

three feet away, quickly turn the coil perpendicular
to the monitor and release the trigger.

5b. WAND-SHAPED COILS: When you are about

three feet away, point the wand away from the
monitor and release the trigger.

Monitor Colors Adjustment
Procedure

For adjusting the colors on any of our monitor types, we

suggest following the procedures described below.

For all monitor types, the visual cues used to adjust the

monitors are white cards and gray boxes (e.g. the

speed bonus box); you will adjust the monitor controls

until the cards are white and the boxes are gray.

Ducksan Monitors

1. Set the game to the Run 21 hi-score screen.

2. Reduce the brightness from the monitor control

panel and adjust the RGB CUTOFF controls (as
needed) until the background is black.

3. Enter the Run 21 game screen. Reduce the

brightness and adjust the RB DRIVE controls until
the speed bonus box is light gray and the cards are
white (there is no Green DRIVE control, so adjust
the Green CUTOFF control if there is too much, or
too little, green).

Wells-Gardner and Telco Monitors

1. Set the game to the Run 21 hi-score screen.

2. Reduce the brightness from the monitor control

panel and adjust the RGB CUTOFF controls (as
needed) until the background is black.

3. Enter the Run 21 game screen and adjust the RGB

DRIVE controls until the playing cards are white
and the speed bonus box is gray.

To adjust vertical and horizontal control:

• Press

“TEST SCREEN” on the “Megatouch Setup”

screen.

• A crosshair will appear on the screen. Change the

DIP switch settings until the horizontal and vertical
lines of the crosshair meet in the middle.

 1998 MERIT INDUSTRIES, INC.

PM0191

MEGATOUCH™ 6 MANUAL

Maintenance

Cleaning the Cabinet

• The cabinet should be cleaned with a damp cloth

and mild detergent.

Cleaning the Touchscreen Monitor

• The touchscreen monitor should be cleaned with a

damp cloth and mild detergent.

To gain access to the entire surface of the monitor

screen on the upright model, you will have to release the

monitor door latches. To do so, open the coin mech

door. Located inside, above and to the right and left of

the coin mech, are two monitor door latches. Unsnap the

monitor door latches and lift the door upwards. See

Figure 9.

To gain access to the entire surface of the monitor

screen on the cabaret model, you will have to release

the monitor door latches. To do so, open the coin mech

door. Located inside, above and to the right and left of

the coin mech, are two monitor door slide-latches.

Loosen the thumb nuts securing the latch and slide the

latch open. Pull up on the bottom of the bezel to

remove it (NOTE: TO FULLY REMOVE THE BEZEL,

YOU MUST DISCONNECT THE GROUND BRAID).

See Figure 6.

To gain access to the entire surface of the monitor

screen on the countertop model, you will have to

remove the top of the machine. To remove the top of

the machine, unlock and open the rear door. Locate the

thumb nuts holding the lock brackets on each side of

the monitor shelf. Unscrew and remove the thumb nuts

and push the top forward. Pull upwards on the top to

remove it from the machine. See Figure 5 for lock

bracket locations.

NOTE: DO NOT USE ANY ABRASIVE SOLVENTS, ACID OR

VINEGAR-BASED CLEANSERS ON THE MONITOR OR
SIDE DECALS. SUCH CLEANSERS COULD HARM THE
TOUCHSCREEN AND ERASE THE DECALS OVER
TIME. BE CAREFUL NOT TO USE COMMERCIAL
CLEANERS CONTAINING ANY OF THESE
SUBSTANCES.

Troubleshooting

Security Key Error Messages

“KEY NOT VALID” message means the security key

is missing

“KEY QUESTION SET ERROR” message means the

security key does not match the

chip set.

Coin Jam

The game also has coin jam and stringing detection

software. Should a coin become jammed in the mech

or someone tries to string the mech, a continuous tone

will be emitted by the game. The game may also make

this sound because the cash box is full.

If the game emits the coin jam indicator sound when

powered up, this may indicate that the NORMALLY

CLOSED contacts of the coin mechanism are being

used. The NORMALLY OPEN contacts must be used.

 1998 MERIT INDUSTRIES, INC.

MEGATOUCH™ 6 MANUAL

PM0191

DIP Switch Settings

Standard Program Settings

The game contains one DIP switch. The DIP switch

comes factory set. It determines which size monitor is

being used, whether the machine displays “quarters” or

“credits” and controls video sync adjustment. These

settings should not need to be changed.

DIP SWITCH

OFF

Position 1

13“

Touchscreen

19”

Touchscreen

Position 2

Quarters

Credits

Positions 5 & 6

Horizontal

Adjustment‡

Horizontal

Adjustment‡

Positions 7 & 8

Vertical

Adjustment‡

Vertical

Adjustment‡

‡This adjusts the vertical and horizontal alignment of the picture. It is

not an adjustment for touchscreen calibration.

Mega Link™ Feature

The Megatouch 6’s Mega Link™ feature allows two

games, in one location, to be linked together, allowing

players to compete head-to-head.

The Mega Link™ logo will appear next to each

“linkable” game in the player’s game menu. Selecting a

“linkable” game brings up the “Mega Link™” icon, along

with the standard “1 player” and “2 player” icons.

If the game is not linked to another Megatouch 6 game,

the Mega Link™ icon will NOT flash; touching the icon

will display the meaage “HEAD-TO-HEAD PLAY

REQUIRES A LINKED MEGATOUCH GAME.”

If the game is linked to another Megatouch 6 game,

touching the “Mega Link™” icon displays the game

menu screen on both of the linked games. The

challenged player has the option of accepting the

challenge, declining the challenge or counter-

challenging by selecting a different game. The player

initiating the challenge has the option of paying for the

opponent or withdrawing the challenge. The

challenging player can also attract attention to the

challenge by touching the “horn” icon. Once a

challenge has been accepted, the game begins.

To connect your games, locate the stuffed connector

on the Communications Pod and connect one end of

the RS485 cable to it. Run the cable to the second

game and connect the other end of the RS-485 cable

to the stuffed connector on its Communications Pod.

Turn on both games.

 1998 MERIT INDUSTRIES, INC.

PM0191

MEGATOUCH™ 6 MANUAL

To Enter This Screen, Press The “Setup” Button In The Coin Mech Section

Figure 1 - Megatouch Setup Screen

Setup Screen Functions*

More Options:

Displays second “page” of soft DIP switch settings (DIPs shown below dotted line are found on
page 2 by touching “More Options”).

Coin-In Menu:

Enters the coin/credit setup screen.

Game Menu:

Enters the game menu selection screen.

Display Books:

Enters the bookkeeping statistics screen. (“PC Dump” is located on the Books screen. PC
Dump allows the books information to be downloaded to a PC. Software for the PC is required
for it to operate. Contact Merit Customer Service for information.)

Test Screen:

Enters the touchscreen calibration test.

Clear Hi- Scores:

Enters the clear game high scores screen. This screen allows the operator to clear the high
scores for any or all games. This screen also allows access to the Set 6 Stars PIN screen*.

Free Credit:

Adds credit without using coin switch. Free credits are listed separately in the books screen.

Clear Credit:

All credits on the machine are erased.

Exit Setup:

Return to the attract mode.

*Six Stars Enabled

This feature allows the high scores (for all active games) to be cleared, without opening the game. When the game
is in attract mode and the screen is touched, the message “You’ve Got the Touch - Deposit Coins Now” will appear
on the screen; if the “six stars enabled” switch is set to “yes,” six stars will appear at the top of this screen. Touch
the stars in sequence to access the clear the high scores. To set the sequence in which the stars must be touched,
go to the “Clear Hi-Scores” screen and follow the instructions.

*To save any changes, you must exit the Setup Screen before turning off the power. If the power is turned off before exiting this screen,

the settings may be lost.

MEGATOUCH SETUP

9255-80-01 07-29-1998 12:00:00

DEFAULT

YES

SOLITAIRE BUY-IN

YES

SEX TOPICS IN WORD GAMES

OFF

BONUS GAME IN SOLITAIRE

ROUNDS IN TRIVIA TWISTER

BALLS IN BREAKIN BRICKS

YES

SIX STARS ENABLED

YES

PLAYER SELECTABLE LANGUAGE

YES

LANGUAGE ENGLISH/OTHER

YES

POWER SOL - SPLIT COLUMN

YES

SHOW ANSWERS IN TRIVIA

5/1M

4/300k

TRIVIA ROUNDS/BONUS

GAME
MENU

DISPLAY

BOOKS

COIN-IN

EXIT

SETUP

CLEAR

CREDIT

TEST

SCREEN

CLEAR

HI-SCORES

FREE

CREDIT

DEFAULT

YES

SOLITAIRE BUY-IN

YES

SEX TOPICS IN WORD GAMES

OFF

BONUS GAME IN SOLITAIRE

ROUNDS IN TRIVIA TWISTER

BALLS IN BREAKIN BRICKS

YES

SIX STARS ENABLED

YES

PLAYER SELECTABLE LANGUAGE

YES

LANGUAGE ENGLISH/OTHER

YES

POWER SOL - SPLIT COLUMN

YES

SHOW ANSWERS IN TRIVIA

5/1M

4/300k

TRIVIA ROUNDS/BONUS

OPTIONS

 1998 MERIT INDUSTRIES, INC.

MEGATOUCH™ 6 MANUAL

PM0191

CLEAR

FORMAT

EXIT

DEFAULT

CLEAR

ALL

MENU 1

To Enter This Screen, Press “Game Menu” In The Setup Screen

1 SOLITAIRE

.25

2 RUN

.25

3 TRIVIA

WHIZ

.25

4 MATCH’EM UP

.25

5 TRI-TOWERS

.25

6 FOURPLAY

.25

MEM-O-REE

.25

8 MORE GAMES…

Figure 2 - Game Menu Screen

The game list and prices are programmed using this screen. Up to 21 games may be made available
for the players. The top of the screen shows the game positions available, with the price for each
game. The lower section shows all games included in the program. Touching the icons on the bottom
of the screen will clear the entire menu, clear a selected menu item, format the Game Menu to
eliminate blanks, display Game Menus 2 and 3, reset the default game menu and pricing and exit the
Game Menu screen.

To program the Game Menu, select the menu position you want the game to occupy by touching that
position. Then touch the game name from the game list on the lower portion of the screen. That
game will now appear in the menu. To adjust the price, touch the price in the game menu. Each
touch will rotate the price from 25¢ (1CR), to 50¢ (2CR), to 75¢ (3CR), to $1 (4CR) and back to 25¢
(1CR). Touch “EXIT” when done.

*These games can be played using Mega Link™ communications.
‡This game can ONLY be played using Mega Link™ communications.

SOLITAIRE*

HORSES

ROLL THE DICE

11-UP*

MEGA MIND

RUN 21*

ROYAL FLASH

PHRAZE CRAZE*

TRI-TOWERS*

PILE-ON‡

TRIVIA WHIZ*

TRIVIA TWISTER

MATCH’EM UP

POWER SOLITAIRE

TAKE 2

DRAW POKER

MEM-O-REE

FOURPLAY

QUIKMATCH*

TRIP FLIP

SUPER 7 STUD

BREAKIN’ BRICKS

CONQUEST

QUINT-ZEE*

SUM FUN

 1998 MERIT INDUSTRIES, INC.

PM0191

MEGATOUCH™ 6 MANUAL

To Enter This Screen, Press “Coin-In Menu” In The Setup Screen

Figure 3 - Coin-In Menu Screen

The coin/credit ratios of the game may be adjusted to meet any application. The CPU board supports up to six coin
inputs: two mechanical mech inputs (1M and 2M) and four electronic mech inputs (1E, 2E, 3E and 4E). (Electronic coin
mechs are typically used when more than one type of coin needs to be accepted. If you would like to convert your game
from a mechanical mech to an electronic mech, please contact your distributor or Merit Technical Support for wiring
details.)

The coin/credit ratios can be adjusted by touching the screen at the location you want to change. The meter pulse can
also be adjusted so that the coin meter can show the actual cash value of the coins in the cashbox, not just the total
number of coins .

Example: Let’s say that in the country of Atlantis the currency is called units. Atlantis, however, has a 1 unit coin, a 2
unit coin and a 5 unit coin. You decide that 1 credit on the game should cost 1 unit. However, to encourage more play
you want to give 6 credits for a 5 unit coin. The coin setup screen would be programmed as follows:

COIN

INPUT

COINS

CREDITS

METER

PULSES

For every 1 unit coin, the game would give 1 credit and count 1 pulse on the mechanical coin counter. For every 2 unit
coin, the game would give 2 credits and count 2 pulses on the mechanical meter. For every 5 unit coin, the game would
give 6 credits and pulse the mechanical meter 5 times. The mechanical meter will now display the total number of
“units” in the cashbox, not total coins or credits. Press “DEFAULT” to return to the factory settings. Press “EXIT” to
return to the GAME SETUP menu.

COIN/CREDIT SETUP

COIN

INPUT

COINS

CREDITS

METER

PULSES

DEFAULT

EXIT

 1998 MERIT INDUSTRIES, INC.

MEGATOUCH™ 6 MANUAL

PM0191

FIGURE 4 - 13” COUNTERTOP (FRONT VIEW)

FIGURE 5 - 13” COUNTERTOP (REAR VIEW)

 1998 MERIT INDUSTRIES, INC.

PM0191

MEGATOUCH™ 6 MANUAL

FIGURE 6 - 19” CABARET (FRONT VIEW)

FIGURE 7 - 19” CABARET (REAR VIEW)

 1998 MERIT INDUSTRIES, INC.

MEGATOUCH™ 6 MANUAL

PM0191

FIGURE 8 - 19” UPRIGHT (FRONT VIEW)

FIGURE 9 - 19” UPRIGHT (REAR VIEW)

 1998 MERIT INDUSTRIES, INC.

PM0191

MEGATOUCH™ 6 MANUAL

MEGATOUCH IV PARTS LISTS

COUNTERTOP

REF #

QUANTITY

PART NO.

DESCRIPTION

EC2001

POWER CORD, 120V

EC2002

POWER CORD, 240V

GL3000-XX

DECAL, MEGATOUCH, (-01=RT;-02=LT)

MW5165-01

MONITOR FILLER PLATE

MW5167-01

LOCK BRACKET, REAR DOOR

MW5151-01

MONITOR SUPPORT

MW5150-01

MAIN CHASSIS

HW8018-01

RUBBER ANTI-SKID PAD

HW8993-02

LAZY SUSAN, 12” DIAMETER, 15 DEG STOPS

HW9001

PLASTIC TUBING

SA5151-01

TOUCHSCREEN/CRT ASSEMBLY

EC9359

CRT, COLOR, 14” CGA, WITH FRAME

EC9824

TOUCHSCREEN OVERLAY

MW5155-01

LID, RETAINING BRACKET

MW5159-01

LID, LOCK BRACKET, RIGHT

MW5159-02

LID, LOCK BRACKET, LEFT

MW5161-01

REAR DOOR

MW5164-01

HINGE, REAR DOOR

HW8713

FLAT LOCK #564 (REAR DOOR)

WD5171-01

CABINET SIDE, RIGHT

WD5171-02

CABINET SIDE, LEFT

EC9154

COUNTER, 12V, FROG EYE MOUNTING

SA5123-01

AC POWER HARNESS

SA5131-01

MAIN HARNESS

HW8953

BEZEL, 13” T/S

SA4084

4” SPEAKER ASSEMBLY

EC7526-02

POWER SUPPLY, SW, 11 AMP

MW5156-01

RETAINING BRACKET, COIN BOX

TA10004-02

PCA, CPU, VID, 260 TESTED

EC9840

SMT-3 TOUCHSCREEN CONTROLLER

HW8741

CIRCULAR LOCK (COIN MECH)

31, 32

SA5156-01

CONNECTOR COIN BOX ASSEMBLY

SA5153-01

COIN BOX ASSEMBLY

HW8727

LOCK, COIN BOX

MW5153-01

LID, COIN BOX

HW4498

THUMB SCREWS, BRASS

SA5152-XX

POWER ENTRY (POWER ENTRY TYPE DETERMINED BY
LINE CORD REQUIREMENTS)

SB0004-02*

ASSY, MOV/ARRESTOR (*240V GAMES ONLY)

HW0001-01

SAFETY COVER, POWER SUPPLY

SA0070-01

ASSY, MEGA LINK COMM POD/HARNESS

 1998 MERIT INDUSTRIES, INC.

MEGATOUCH™ 6 MANUAL

PM0191

19” CABARET

REF#

QUANTITY

PART NO.

DESCRIPTION

EC2001

POWER CORD, 120V

EC2002

POWER CORD, 240V

WD5060-01

WOOD CABINET, URTS, 19” CABARET

MW1672-01

CONTROL PANEL, 19” CABARET

MW1673-01

COVER SCREEN, 19” CABARET

MW1671-01

BRKT, GLASS, UPPER, 19” CABARET

HW8951-01

BEZEL, MONITOR, 19” CABARET

SA3266-02

CRT ASSY, 19” CABARET

SA3263-01

POWER ENTRY, URTS, 120V

SA3270-01

POWER ENTRY, URTS, 240V

SA4084

SPEAKER ASSY, 4”

SA3209-01

BRKT ASSY, METER/TEST SW

SA3281-01

MAIN HARNESS, 19” CABARET

TA10004-02

PCA, CPU, VID, 260

SA3282-01

POWER HARNESS, 19” CABARET

EC7526-02

POWER SUPPLY

WD5052-01

PC SHELF, CABARET

SA3264-01

SWITCH ASSY, URTS

SB1523-02

FLUORESCENT LAMP ASSY, 120V, 22”

EC6052-04

FLUOR, 15”, 120V-60Hz, W/10” CABLE

GL2401-03

VINYL, MARQ, MEGATOUCH 19” CABARET

GL2411-03

PLEXI, CLR, 19” CABARET SIGN

GL2999-01

DECAL, MEGATOUCH, URTS, CABARET

MW1674-01

MONITOR SUPPORT, LEFT, 19” CAB

MW1674-02

MONITOR SUPPORT, RIGHT, 19” CAB

HW8979

SLIDE LATCH, DART MATRIX SW

HW1677-01

COVER, SPEAKER HOLE, 19” CABARET

HW6366

MOUNTING POST, KNURLED

LB2100

LAMP, FLUOR, 15: F15T8CW

EC9840

SMT-3 TOUCHSCREEN CONTROL MODULE

MW1670-01

SPEAKER, MTG BRKT, 19” CAB

EC9374

CRT, COLOR, 20”, CGA, DC COUPLED

EC9839

OVRLAY, T/S 19” W/58” CABLE

WD5061-01

SHELF, MONITOR 19” CAB

MW0006-01*

COVER, PCA (*240V GAMES ONLY)

SB0004-02*

ASSY, MOV/ARRESTOR (*240V GAMES ONLY)

HW0001-01

SAFETY COVER, POWER SUPPLY

SA0070-01

ASSY, MEGA LINK COMM POD/HARNESS

 1998 MERIT INDUSTRIES, INC.

PM0191

MEGATOUCH™ 6 MANUAL

19” UPRIGHT

REF#

QUANTITY

PART NO.

DESCRIPTION

EC2001

POWER CORD, 120V

EC2002

POWER CORD, 240V

HW8711

ANCHOR PLATE FOR CAM LOCK

HW8716

FLAT LOCK, #564

HW8960

LEG LEVELER

MW0044-01

DOOR LOCK PLATE, URTB

SA3230-01

BEZEL ASSEMBLY

MW5006-01

SPEAKER COVER

SA0015-01

HARNESS, MAIN, UNIVERSAL, 19”CAB/URTS

SA3216-01

AC POWER HARNESS

EC7526-02

POWER SUPPLY

TA10004-02

PCA, CPU, VID, 260

SA3202-04

SHELF ASSEMBLY, TOUCHSCREEN/CRT, 120V

WD2014-01

PCB MOUNTING SHELF

SA3210-02

TOUCHSCREEN/CRT ASSEMBLY

EC9374

CRT, COLOR, 19” CGA

EC9823

TOUCHSCREEN OVERLAY, 19”

WD2013-01

CRT MOUNTING SHELF

MW5003-01

CRT ADJUST, BRACKET, LEFT

MW5003-02

CRT ADJUST, BRACKET, RIGHT

SA3206-01

POWER ENTRY, UR 19”, T/S, 120V

SA3170-01

POWER ENTRY, UR 19”, T/S, 240V

SA4084

SPEAKER ASSEMBLY

WD2012-01

CABINET, 19” UPRIGHT TOUCHSCREEN

SA3209-01

METER/TEST SWITCH BRACKET ASSEMBLY

EC9840

SMT-3 TOUCHSCREEN CONTROL MODULE

MW0006-01*

COVER, PCA, 19” URTS/CAB (*240V GAMES ONLY)

SB0004-02*

ASSY, MOV/ARRESTOR (*240V GAMES ONLY)

HW0001-01

SAFETY COVER, POWER SUPPLY

SA0070-01

ASSY, MEGA LINK COMM POD/HARNESS

 1998 MERIT INDUSTRIES, INC.

MEGATOUCH™ 6 MANUAL

PM0191

Merit Video

Limited Warranty

Merit Industries, Inc. warrants it’s video countertop and
upright machines to be free from defects in material
and workmanship for a period of six months from the
date of delivery or seven months from the date of
shipment from its facilities, whichever occurs first. The
warranty covers all electrical components (except fuses
and light bulbs) and printed circuit boards. Other items
are covered by warranty periods offered by the original
equipment manufacturers (power supplies - 90 days;
video monitors - 90 days).

Failure due to misuse, vandalism, excessive or
intentional abuse, operation outside specified
conditions (including, but not limited to, improper
electrical power source), fire, water damage, acts of
God, acts of war and civil unrest are specifically
excluded.

Merit products are carefully inspected and thoroughly
tested prior to packing and shipment. Any damage
discovered upon receipt of goods, whether obvious or
concealed, must be reported immediately to the
delivering carrier and claims made directly to them.
Merit assumes no responsibility for damages once the
product has left its facilities and any disputes regarding
transportation damage must be resolved with the
shipping company(s).

Merit will repair or replace, at its option, any
component, part or assembly that fails under warranty,
provided that the failed item is returned, shipping
charges prepaid, to Merit’s repair facility and Merit is
notified of the failure within the warranty period. Merit
reserves the right to request the serial numbers of the
item and/or game which has failed , and copies of sales
invoices, bills of lading or other documents as required
to determine the validity of the warranty coverage. Merit
will return or replace warranty items, as specified
above, shipping charges prepaid, by ground
transportation.

Merit’s obligation shall be limited to repair or
replacement as stated above, and shall specifically
exclude any liability for consequential damages or loss
of earnings.

Merit may, at its discretion, provide replacement parts
under warranty prior to receiving defective items
without incurring any ongoing obligation to extend such
accommodations.

In certain instances, due to geographical or other
considerations, Merit may offer PCB warranty service
on an extended time basis as follows:

(a) User notifies Merit in writing (or FAX) of PCB
failure, providing dates of failure, serial numbers
and a brief description of failure symptoms.

(b) Failed PCBs are accumulated for a time
period or quantity accumulation, as designated
by Merit and sent in one shipment to save
shipping expenses.

The above terms and conditions constitute the sole
obligation, written or implied, of Merit Industries under
its warranty coverage.

PROPRIETARY

THE INFORMATION CONTAINED HEREIN IS THE
EXCLUSIVE PROPERTY OF MERIT INDUSTRIES,
INCORPORATED AND SHALL NOT BE USED,
DISTRIBUTED OR REPRODUCED IN WHOLE, OR IN
PART, WITHOUT THE EXPRESS WRITTEN
PERMISSION OF MERIT INDUSTRIES,
INCORPORATED.

FCC WARNING

THIS EQUIPMENT COMPLIES WITH THE
REQUIREMENTS IN PART 15 OF FCC RULES FOR
A CLASS “A” COMPUTING DEVICE. OPERATION IN
A RESIDENTIAL AREA MAY CAUSE
INTERFERENCE TO RADIO AND TV RECEPTION
REQUIRING THE OPERATOR TO TAKE WHATEVER
STEPS ARE NECESSARY TO CORRECT THE
INTERFERENCE

Converted from the original PDF for faster on-screen reading. Use Download PDF for the source document.