COPYRIGHT © 2009 AMI ENTERTAINMENT NETWORK, INC.
TN79 Rev G – PM0557-08
Tech Notes
Page 1 of 1
Tech Notes
Date: 4-1-10
Re: I/O Board Replacement in Ion, Megatouch Entertainer, Money Shoot, and Megatouch Champ Games
When replacing the I/O board in an Ion, Megatouch Entertainer, Money Shoot, or Megatouch Champ game, make
sure the jumper settings on the I/O board are correct. If you have questions, please contact Customer Service &
Technical Support by phone at 215-826-1400 or 800-523-2760, or e-mail TechCenter@amientertainment.com.
• For Aurora games with Imonex V92 series coin mechs AND a serial number between 043007XXXXXXXX and
011608XXXXXXXX, the shunt must be removed from JP1.
(The first 6 digits of the serial number are the date of manufacture.)
• For all other Aurora games, the shunt must be in place at JP1.
• For Ion eVo (serial number 100107XXXXXXXXX or greater) & Ion Elite Edge (serial number 092507XXXXXXXX or greater)
with Imonex V92 series coin mechs, the shunt must be removed from JP1.
(The first 6 digits of the serial number are the date of manufacture.)
• For all other Ion eVo and Ion Elite Edge games, the shunt must be in place at JP1.
• For games with Imonex coin mechs, the shunt must be removed from:
JP8 (for I/O boards with the part numbers: SA10068-01, -02, -03, and -04) or
JP7 (for I/O boards with the part number: SA10068-05 or higher).
• For games without Imonex coin mechs, the shunt must be in place at:
JP8 (for I/O boards with the part numbers: SA10068-01, -02, -03, and -04) or
JP7 (for I/O boards with the part number: SA10068-05 or higher).
• For Aurora, Ion eVo, Ion Elite Edge and Ion Fusion games, the shunt must be in place at JP17.
• For Megatouch Entertainer, Rx, Ion eVo Wallette, Megatouch Champ & KidzPace games, the shunt must be removed from
JP17.
• For Megatouch Entertainer or eVo Wallette games using the speakers that came with the unit or using your own speakers,
the shunt must be on pins 1 & 2 at JP14.
• For Megatouch Entertainer or eVo Wallette games using the Premium Sound System Kit, or using your own amplifier, the
shunt must be on pins 2 & 3 at JP14.
• For Money Shoot games, the shunt at JP12 and JP13 must be on pins 1 and 2.
• For mini-Drucker printer function, the shunt at JP12 and JP13 must be on pins 2 and 3.
http://www.amientertainment.com
JP17
JP18/JP19
PIN 1 AT JP14
JP7/JP8
JP1
PIN 1 AT JP12
PIN 1 AT JP13